A universal sandwich plate with full internal flow both ways. This unit will not divert oil away from the installation (to oil cooler etc) but does allow for sensors and oil feeds to be installed.
Available with 3/4UNF or M20 x 1.5mm threaded fitting bolts and other threads upon application.
In total it has four ports, two are 1/2BSP that will reduce to 1/8NPT with the supplied adaptors and it has two additional 1/8 NPT ports (1/8 NPT plugs included). These allow for the fitting of temperature or pressure sensors and installing an oil take off for turbo or superchargers etc. It should be noted that any oil take off (feed) must be regulated or restricted either in line or at the application.
Some key details
- Machined from 6061 billet aluminium and anodised silver, blue, red or black
- 34.00mm height
- 80mm width
- Two versions available - 3/4UNF or M20 x 1.5mm fitting bolts
- Main ports are 1/2BSP and the kit comes with adaptors to 1/8 NPT. Other adaptors are available
- Two additional 1/8 NPT ports in main body
This sandwich plate kit is universal in its application. It is installed between the spin on oil filter and filter housing. Popular thread choices are 3/4UNF or M20 x 1.5mm thread type (others available).
For more information visit http://www.mihperformance.com/#/tvc60/4528307176
This is what you will get with your TVC60
It is a complete kit, ready to install and is supplied in display packaging that includes
1 x MIH Performance Universal Full Bypass Oil Sandwich Plate
1 x 3/4UNF or M20 x 1.5mm Fixing bolt - choose when ordering
2 x 1/2BSP to 1/8 NPT adaptors with 'O' ring seals
4 x 1/8 NPT plugs
1 x Large 'O' ring
1 x Allen Wrench
1 x Information Leaflet.
