Mocal in line thermostats and inline temp gauge adaptors

In this category we detail In line thermostats and In line temperature gauge adaptors

Inline Thermostat

An In line thermostate will recirculate oil (by offering a least resistence return route) at temperatures less than 80degrees C. These are used when a sandwich plate is not available with built in thermostate or when the oil feed and return from the engine is not via a sandwich plate.

Inline Temperature gauge adaptor

An In line temperature gauge adaptor allows the fitting of temperature gauge sender units of the following thread types;

3/8BSP

5/8UNF

M14 x 1.5mm

A bushing reducer could be used to reduce to your sender unit if required.

Should you have any questions please call our office.

-08 JIC oil thermostat inline 574-OT-08 £89.02	-10 JIC oil thermostat inline 574-OT-10 £82.56
-12 JIC oil thermostat inline 574-OT-12 £83.02	-16 JIC oil thermostat inline 574-OT-16 £88.37
1/2" Push on oil thermostat inline 574-OT-1/2 £32.82	5/8" Push on oil thermostat inline 574-OT-5/8 £87.45
-08 JIC temperature gauge adaptor, Inline 574-TGA-08 £38.12	-10 JIC temperature gauge adaptor - Inline 574-TGA-10 £38.12
-12 JIC temperature gauge adaptor - Inline 574-TGA-12 £38.12	-16 JIC temperature gauge adaptor - Inline 574-TGA-16 £38.12
1/2" Push On temperature gauge adaptor - Inline 574-TGA-1/2 £25.26	5/8" Push On temperature gauge adaptor - Inline 574-TGA-5/8 £33.72