The TVC300 fully demountable Inspection Oil Filter provides easy access to inspect for debris or particles when the oil is changed. This is a typical requirment for racers and vehicle owners who want to check regularly for signs of engine wear.
The canister and canister cap are machined from billet 6061 aluminium and anodised silver to give a lasting and durable finish. The filter element is stainless steel rated at 30 micron that is cleanable in solvent and fully re-usable. Included is a magnetic base to help trap any particles.
The pack includes a tool that engages with the canister cap to make assembly and disassembly easy and will also fit the canister end cap from the inside - thus allowing the end cap to be removed from the engine or filter housing should it remain in place.
Fully compatible with the TVC50, TVC60 and TVC100 products from the MIH Performance range. Will fit as a direct replacement for a standard oil filter.
Here are some key details of this product.
- Machined from 6061 billet aluminium and silver anodised
- 3/4UNF or M20 x 1.5mm filter mounting spigot
- Integral one way valve
- 30 micron stainless steel filter element with magnetic base
- 12 to 16 gallons per minute flow rating
- 'O' ring sealing face is 68mm dia.
Suitable for any engine that has the same fixing threads (3/4 UNF or M20 x 1.5mm) and has operational tolerances within the capacity of this filter as stated above.
For more information go to http://www.mihperformance.com/#/tvc300/4528986308
This is what you will get with your TVC300
It is a complete kit, ready to install and is supplied in display packaging that includes
1 x Billet 6061 main canister
1 x 30 Micron stainless steel cleanable filter element with magnetic outer base
1 x Canister end cap with integral one way valve and outer 'O' ring
1x Dismantle tool
1 x Information Leaflet
Available with either 3/4 UNF or M20 x 1.5mm threads in the canister end cap.
