Billet anodoised aliminium 3 port distribution block. Has a 1/8NPT port on one side to allow gauge of small feed take off, supplied with blanking plug
Specification
- Inlet port 1/2npt
- Both oulet ports are 3/8NPT
- Gauge port is 1/8NPT
- 62mm long
- 60mm wide (widest point)
- 28mm thick
- 5mm fixing holes x 2 in block.
- Blue anodise
- Supplied with fixing bolts, washers and nuts (M5 x 50mm)
We have extensive stocks of NPT fittings to ensure a correct fit to you hose.
